| Easy
Assembly Instruction |
|||||||||||||||||||||
| Pic.1 |
![]() |
Keep the Q-BIKE in a standing position. | |||||||||||||||||||
| Pic.2 |
![]() |
|
|||||||||||||||||||
| Pic.3 |
![]() |
|
|||||||||||||||||||
| Pic.4 |
![]() |
Keep the quick-release bar inware. | |||||||||||||||||||
| Pic.5 |
![]() |
Insert the stem
into the headset. Slightly loosen the wedge on the bottom of the stem before insert into the headset. |
|||||||||||||||||||
| Pic.6 |
![]() |
Adjust and tighten the handle bar with the attached hex key wrench. | |||||||||||||||||||
| Pic.7 |
![]() |
Reposition the foldable pedal by pulling the
clip inward. Release pulling after the pedal is extended. |
|||||||||||||||||||
| Pic.8 |
![]() |
Beware the position of the attached hex key
wrench. Keep the wrench facing the recessed area on the fork. |
|||||||||||||||||||
| Pic.9 |
![]() |
Normal position of the Strength-Saving-Steering (SSS) device. | |||||||||||||||||||
| Pic.10 |
![]() |
Abnormal position of the Strength-Saving-Steering
device. To restore the SSS device, turn the handle-bar to the left hand side in full direction and reverse the handle bar slowly to the right until the SSS device is in the normal position. |
|||||||||||||||||||
|
|||||||||||||||||||||
|
|||||||||||||||||||||